FOLDABLE LENS:(ISO-CE0434)

    SHREEJI MICRO SYSTEMS INC

INJECTING PROCEDURE

1.Load the Pusher into the Injector piston from the Pusher Holder. 5.Hold the cartridge wings together tightly to keep the loaded cartridge closed. 2.Lubricate the inner surface of the Cartridge with a Viscoelastic. 6.Slide the cartridge into the opening of the Appa Injector till it sits properly in the slot. 3.Take the Lens from the glass bottle with forceps. 7.Advance the piston firmly in smooth motion till it enters into the Cartridge. 4.Push the Lens down with the forceps between the bends of the wings and parallelly close the wings. 8.Insert the tip of the Cartridge through the incision. Note: 1.The lens should be injected within a minute or two after loading the lens because viscoelastic may lose its lubricity when exposed into air for long period. 2.When loading the lens into the cartridge,make sure that thehaptics are not caught between the wings when they are closed. Implantation Data Folding & Unfolding Good to Excellent Memory Excellent Biocompatibility Excellent Average visual acuity Good to Excellent with no inflammation present Dislocation No cases reported Opacification No cases reported Incidende of PCO Very Low YAG laser compatibility Excellent (where needed) The Specification of the HEMA Material Nature Copolymer of hydroxy ethyl Methacrylate and Methyl methacrylate UV Blocker AEHB Linear Expansion 1.127 ± 0.01 at 20oC Radial Expansion 1.122 ± 0.01 at 20oC Water content 26% at 20oC Refractive index 1.460 HYDRATED at 20oC Refractive index 1.461 HYDRATED at 35oC Optical transmission  95% Density 1.18g/cm3 HYDRATED Tensile Strength 56.86 kg/cm2 Elongation to Break 279% Sterilization Moist Heat Sterilization Diopter Range 8.00 D - 30.0 D in 0.5 Diopter Increment